- Overview
- Product Overview & Application
- Standard Compliance
- Product Parameters
- Detailed Photos
- Company Profile
- Our Service
- Packaging & Shipping
- FAQ
Basic Info.
Model NO.
KTS-100D
Certification
CE, ISO
Warranty
1 Year
Working Chamber
100 Liters
Temp. Shock Range
-65ºC~+150ºC
Cooling Method
Water Cooling
Testing Size(W* H* D)
500*450*450mm
Exterior Size(W* H* D)
1520*1990*2050mm
High Temp. Chamber Temp. Range
+60ºC~+200ºC
Low Temp. Chamber Temp. Range
-70ºC~0ºC
Pre-Heating Time
Within 30 Min
Pre-Cooling Time
Within 70 Min
Temperature Uniformity
+/-2ºC
Temp. Fluctuation
+/-0.5ºC
Temp. Deviation
+/-2ºC
Temp. Recovery Time
Within 5 Min
Controller
7-Inch LCD Touch Screen
Compressor
Copeland
Transport Package
Standard Exported Wooden Box
Specification
Standard & Customized available
Trademark
KOMEG
Origin
Dongguan, China
HS Code
9032100000
Production Capacity
100 Sets /Month
Packaging & Delivery
Package Size
100.00cm * 100.00cm * 100.00cm
Package Gross Weight
1000.000kg
Product Description
3 Zone Thermal Shock Test Equipment With LCD Touch Screen Controller
3 Zone Thermal Shock Test Equipment is consists of High-temperature zone (Pre-heating area), Low-temperature zone (Pre-cooling area), and DUTs testing area (thermal shock testing zone). Adopting independent wind path valve switching mode to transfer hot air and cold air to test area; and make sure the high low temperature transferring swiftly, the test sample(DUTs) needn't move during the whole testing process. The test chamber is suitable for materials industry to examine the whole set of products, components, parts, and materials subjected to rapid changes between high and low-temperature conditions; and to evaluate the test samples' performance reliability when suffering the extreme temperature change due to thermal expansion and contraction caused by the changes of chemical or physical damage.
| GB-2423.1-2008(IEC68-2-1) | Test A: Low Temperature Test |
| GB-2423.2-2008(IEC68-2-2) | Test B: High Temperature Test |
| GJBl50.3-2009(MIL-STD-810D) | High Temperature Test |
| GJBl50.4-2009(MIL-STD-810D) | Low Temperature Test |
| GJBl50.5-2009 | Temperature shock test method |
| Model | KTS-100D |
| Volume(L) | 100L |
| Testing size W*H*D(mm) | 500*450*450mm |
| Exterior size W*H*D(mm) | 1520*1990*2050mm |
| High Temp.Chamber | +60ºC~+200ºC |
| Pre-heating time | from normal temperature RT ~ +200ºC, Within 30 min |
| Low Temp.Chamber | 0ºC~-70ºC |
| Pre-cooling time | from normal temperature RT ~ -70° C Within 70 min |
| Temp.Shock Range | -65ºC~+150ºC |
| Temperature uniformity | <=±2.0ºC |
| Temperature fluctuation | <=±0.5ºC |
| Temperature deviation | ±2.0ºC |
| Transfer time | <=5s |
| Recovery time | <=5min |
| Noise | <=75dB |
| Interior material | Stainless steel plate(SUS 304) |
| Exterior material | Baked painting steel or stainless steel(SUS304) |
| Insulation material | Rigid polyurethane Foam + glass fiber wool |
| Cooling method | Water Cooled |
| Refrigeration system | Semi-hermetic compressor, cascade refrigeration system,Eco-friendly refrigerant |
| Controller | Panel:KOMEG 7-inch Programmable *Operating system: KOMEG KM-5188 Cold-punching system cold output version |
| Safety device | NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection,shortage water protector |
| Standard accessory | Cable port(portΦ50mm)*1, Shelves*2(load capacity 20kg) , Mobile Casters with foot cups*4 |
| Environment Condition | 1.Ambient temperature: 5ºC-35ºC 2.Relative humidity: <=85%R.H 3.Atmospheric pressure:80kPa~106kPa 4.Flat, vibration-free ground; 5.Choose good ventilation, no direct sunlight or direct radiation from other heat sources; 6.There is no strong airflow around: when the surrounding air needs to flow, the airflow should not be blown directly onto the cabinet.; 7.No strong electromagnetic field around; 8.No high concentration of dust and corrosive substances around |
| Power | AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |
Our Process Flow
Pre-sale Service:
Provide test solution
Send specification and quotation
In-sale Service:
DesignProduction
Calibration
Installation
Training
Preventative maintenance
After-sale Service:
24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair
Q:Are your company a trading one or a factory?
A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.
Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.
Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.
Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our
production lead time depends on specific items and item quantities.
Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.
Q:What about the product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.
Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.