- Overview
- Product Overview & Application
- Standard Compliance
- Product Parameters
- Detailed Photos
- Company Profile
- Our Service
- Packaging & Shipping
- FAQ
Basic Info.
Model NO.
HAST-55
Certification
CE, ISO
Warranty
1 Year
Temperature Range
+105ºC~+162.5ºC
Humidity Range
65%~100%R H
Pressure Range
0.019~0.393MPa
Interior Size Φ*D(Cm)
Φ55*65cm
Exterior Size W*H*D(Cm)
115*155*140cm
Temperature Uniformity
+/-0.5ºC
Temp. Fluctuation
+/-0.5ºC
Humidity Fluctuation
+/-2.0%R H
Humidity Deviation
+/-5.0%R H
Heating up Rate
±25ºC~+135ºC Within 45 Min
Pressure Deviation
≦±2 Kpa
Pressurization Time
0~0.196MPa Within 20 Min
Controller
7-Inch LCD Touch Screen
Compressor
Tecumseh or SANYO
Transport Package
Standard Exported Wooden Box
Specification
Standard & Customized available
Trademark
KOMEG
Origin
Dongguan, China
HS Code
9032100000
Production Capacity
100 Sets / Month
Product Description
Highly Accelerated Temperature Humidity Stress Testing Chamber HAST-55
HAST (Highly Accelerated Stress Test) chamber can perform very extreme accelerated test, which is applied to test high temperature and high humidity resistance of product or material under condition of specified temperature (above 100°C), humidity (65% to 100%) and specified pressure.
It is widely used in semiconductors, IC packing, plastic sealed parts and so on.
GB/T2423.40,IEC60068-2-66,JESD22-A102-D,JESD22-A110-D,JESD22-A118-A
| Model | KM-HAST Series | ||||
| KM-HAST-25 | KM-HAST-35 | KM-HAST-40 | KM-HAST-55 | ||
| Interior size | Φ(cm) | 25 | 35 | 40 | 55 |
| D(cm) | 45 | 45 | 45 | 65 | |
| Exterior size | W(cm) | 56 | 73 | 75 | 115 |
| H(cm) | 125 | 163 | 155 | 155 | |
| D(cm) | 105 | 110 | 130 | 140 | |
| Temp. range | +105ºC~+162.5ºC | ||||
| Humidity range | 65%~100%R H | ||||
| Pressure range | 0.019~0.393Mpa | ||||
| Temp. fluctuation | ±0.5ºC | ||||
| Temp. uniformity | ±0.5ºC | ||||
| Humidity fluctuation | ±2.0%R H | ||||
| Humidity deviation | ±5.0%R H | ||||
| Pressure deviation | <=±2 kPa | ||||
| Heating up rate | ±25ºC~+135ºC within 45 min (average in whole process) ( no-load,no heating) | ||||
| Pressurization time | 0→0.196Mpa within 20 min | ||||
| Chamber Structure | Interior material:Stainless steel plate(SUS 316) | ||||
| Exterior material:Baked painting steel or stainless steel | |||||
| Insulation material:Rigid polyurethane Foam + glass fiber wool | |||||
| Controller | Panel:KOMEG 7 inch touch screen controller. KM-5160 version | ||||
| Environment Condition | 1.Ambient Temperature: 5ºC-35ºC; 2.Humidity: No higher than 85%R.H 3.Air pressure:80kPa~106kPa 4.Flat and no vibration floor; | ||||
| Safety device | NFB(No fuse breaker), over pressure, over heat and over current protectors for compressor, over temperature protectors, over load protector of fan, dry heat protector,short of water protector | ||||
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||||
HAST/PCT
HAST testing accelerates the penetration of moisture through the external protective materials or sealants or between the external material and conductors. This is done by applying pressure under set conditions of Temperature and Humidity continuously. This uses a non-condensing (unsaturated method) of applying super-heated steam in a pressurized and temperature controlled environment.
Biased and Unbiased HAST Testing
HAST testing has become a standard, particularly in the Semiconductor, Solar and other Industries as the fast and effective alternative to the standard Temperature Humidity Bias testing (85C/85%RH-1000 hrs).
• JEDEC standard JESD22-A110 (Biased HAST) and JESDA118 (Unbiased HAST)
Typical Conditions:
130°C/85%RH/33.3 psia and
110°C/85%RH.17.7 psia
Duration: 96 or 264 hours
Power cycled Biased HAST testing is usually performed for high power devices.
We design, develop, manufacture, select materials (Critical Socket & PCB material) and provide full-turnkey services for HAST boards for many types of Test Specimens.
The HAST Chamber is an effective tool for running the Surface Isolation Resistance (SIR) Analysis where the subject test specimen is typically set up with the following test parameters:
110C/85%RH/5VDC/264hours under Pressure conditions.
The HAST Chamber is also used performing Conductive Anodic Filament (Volume/Material) CAP Analysis where the subject test specimen is typically set up with the following test parameters:
130C/85%RH/3, 5VDC/96 hours under Pressure conditions. These tests are essentially used for checking out the via-to-via or plane-to-plane in PCB's.
Some of the other tests include the Electro-chemical Migration (ECM) for PCB's
Reference: JEDEC Standard JESD22-A110
HAST Testing Benefits:
• Reduce product development & design time
• Ensure product quality & reliability
• Increase customer confidence
• Reduce warranty costs
• Increase profitability
Our Process Flow:
Pre-sale Service:
Provide test solution
Send specification and quotation
In-sale Service:
DesignProduction
Calibration
Installation
Training
Preventative maintenance
After-sale Service:
24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair
Q:Are your company a trading one or a factory?
A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.
Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.
Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.
Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our
production lead time depends on specific items and item quantities.
Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.
Q:What about the product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.
Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.