Basic Info.
Model NO.
HT-CD-1124-12m3
Warranty
1 Year
Overall Dimensions
W2400*D3300*H2800mm
Gas Source
≥0.6MPa
Weight
About 6 Tons
Pressure Range
8.0 Kpa ~ Normal Pressure (Adjustable)
Pressure Adjustment Accuracy
0.1kpa
Pressure Rise Time
Less Than 10min
Data Line Interface
Group 2,8 Core Line
Smoke Exhaust Pipe
Od φ 60mm
Transport Package
Each Unit Is Protected with Foam and Film and Pack
Specification
W2000*D3000*H2000mm
Trademark
HOTOTECH
Origin
China
HS Code
9024800000
Production Capacity
200sets/Month
Product Description
Simulated battery pack high-altitude and low-voltage environmental testing high-altitude low-pressure test chamber
Product Overview:
The battery core in the battery pack is packed by the pressure around the standard atmosphere. Under normal circumstances, the internal and external pressure is basically balanced. When the battery pack is used on the plateau, due to the rise of altitude, the atmospheric pressure becomes lower. In this case, the battery pack may leak liquid and other phenomena. The simulated high altitude test box is to simulate the condition of the battery pack at high altitude and low pressure, and observe the safety performance of the battery pack. It is a special testing instrument for power battery pack and system safety test. It is the only choice for lithium battery pack manufacturers, electric vehicle manufacturers and scientific research and testing units
Equipment composition:
The high-altitude simulation test box is composed of box structure parts, vacuum pump system, measurement and control system, pressure relief device, camera monitoring system, safety protection system, etc
Satisfying standard:
GB / T 31467.3-2015- -Lithium-ion Power Battery Packs and Systems for Electric Vehicles- -Part 3: Safety Requirements and Test Methods
GB / T 31485-2015 Safety Requirements and Test Methods for Power Battery for Electric Vehicles
Product Parameter:
Company Profile:
Product Overview:
The battery core in the battery pack is packed by the pressure around the standard atmosphere. Under normal circumstances, the internal and external pressure is basically balanced. When the battery pack is used on the plateau, due to the rise of altitude, the atmospheric pressure becomes lower. In this case, the battery pack may leak liquid and other phenomena. The simulated high altitude test box is to simulate the condition of the battery pack at high altitude and low pressure, and observe the safety performance of the battery pack. It is a special testing instrument for power battery pack and system safety test. It is the only choice for lithium battery pack manufacturers, electric vehicle manufacturers and scientific research and testing units
Equipment composition:
The high-altitude simulation test box is composed of box structure parts, vacuum pump system, measurement and control system, pressure relief device, camera monitoring system, safety protection system, etc
Satisfying standard:
GB / T 31467.3-2015- -Lithium-ion Power Battery Packs and Systems for Electric Vehicles- -Part 3: Safety Requirements and Test Methods
GB / T 31485-2015 Safety Requirements and Test Methods for Power Battery for Electric Vehicles
Product Parameter:
| 1.01 Product name | Simulated high-altitude test box |
| 1.02 Product model number | HT-CD-1124-12m3 |
| 1.03 Test space | W2000*D3000*H2000mm |
| 1.04 Material of the inner box | Q235B steel plate, thickness of 10mm + Q235B profile reinforcement and welding |
| 1.05 Battery pack placement | The battery pack is placed directly on the bottom of the inner box, bearing 2000kg |
| 1.06 Material of the outer box | Spray treatment of cold-rolled steel plate |
| 1.07 Pressure range | 8.0 kPa ~ normal pressure (adjustable) |
| 1.08 Pressure adjustment accuracy | 0.1KPa |
| 1.09 Vacuum time | From the atmospheric pressure to the 11.3kPa for 30min |
| 1.10 Pressure rise time | Less than 10min |
| 1.11 System seal | No more than 1 kPa for leakage within 30min |
| 1.12 High-voltage terminal post | Two groups, a total of 4, resistant to 400A, 1000V DC with a number identification to prevent errors |
| 1.13 Low-voltage terminal post | Two groups, 4,20A, 60V DC 400A, 1000V DC; with number identification to prevent errors |
| 1.14 Data line interface | Group 2,8 core line |
| 1.15 Observation window | 1.2 superposition of thickened tempered explosion-proof glass; prevent one cracked glass from being sucked into the box and causing safety accident; add a layer of explosion-proof glass to avoid this accident |
| 2. Window size: W400 * H400MM | |
| 1.16 Boxes of doors | (1) Size: about W2300XH2300mm |
| (2) Manual opening and closing: the door is equipped with heavy load hinge and plane thrust bearing, reduce friction, open and close the door more easily | |
| (3) equipped with 2 sets of door locks: door lock in the form of pressing lock, manual switch more effort | |
| 1.17 video camera | Install a video surveillance camera from outside the window |
| 1.18 Lighting lamp | 1 high and low temperature explosion-proof lamp source LED lamp; power 50W |
| 1.19 Overall dimensions | W2400*D3300*H2800mm |
| 1.20 Total weight of the equipment | About 6 tons |
| 1.21 Power supply | AC380V6kW |
| 1.22 Gas source | ≥0.6MPa |
| 1.23 Smoke exhaust pipe | OD φ 60mm |
| 1.24 Installation conditions | 1. Ground load-bearing capacity of 1,500 kg/m² |
| 2. Laboratory space W6500 * D5000 * H4500mm | |
| 3. Lighting system is installed in the laboratory with an illumination level of 200 lumens | |
| 4. The laboratory is equipped with compressed gas sources | |
| 5. The laboratory is equipped with smoke discharge pipe |
Company Profile:
