Basic Info.
Model NO.
HT-CD-1131
Mass Scope of Workpiece
1000kg
Type
Salt Spray Testing Machine
Load Way
Electronic Load
Display
Digital
Control
Computer Control
Weight
7000kg
Power Source
AC380V
Outline Dimension
W2300*D5200*H3000 mm (in The Case of The Actual Si
Temperature Range
0ºC~+85ºC
Temperature Fluctuation
±0.5
Temperature Departure
±2
Humidity Range
20%-98%R.H
Relative Humidity Fluctuation
±3%R.H
Cooling-Down Method
Forced Air Cooling
Transport Package
Each Unit Is Protected with Foam and Film and Pack
Specification
W2000*D3000*H2000MM
Trademark
HOTOTECH
Origin
China
HS Code
9024800000
Production Capacity
200sets/Month
Product Description
Simulated saline solution fog test machine corrosion tester salt spray test chamber
Test objective:
Simulation battery package or system at a certain temperature, a certain pH and a certain concentration of salt spray environment to maintain for a period of time, the battery package or system will appear leakage, shell rupture, fire or explosion phenomenon, with the phenomenon structure as an important basis to judge its safety line. At the same time, the machine can also test the corrosion resistance of its products after electroplating, anode treatment, spraying, anticorrosion oil and other corrosion treatment on the surface of various materials. The machine adopts walk-in structure, and the test box has high explosion-proof performance and rapid fire extinguishing device, which can guarantee the test safety
Test procedure:
2.1. The test object is the battery pack or the system
2.2. Four test cycles according to GB / T 2423.18 Harness Level (5)
2.3. The salt solution is sodium chloride (chemically pure. Analytically pure) and distilled or deionized water configurations at a concentration of (5 ± 0.1)% (mass fraction).(20 ± 2) The PH value measured at ºC is between 6.5 and 7.2
2.4. Put the test object into the salt spray box and spray salt spray at 15ºC ~35ºC for 2h. After the spray, the test subjects were transferred to a damp heat box for 20h~22h, temperature (40 ± 2) ºC and relative humidity (90 ± 3)% into a cycle. This cycle was repeated three times and then stored for 3d in the test standard atmospheric conditions [temperature (23 ± 2) ºC, relative humidity 45%~55%] to form one cycle for four repeated cycles
2.5. Requirements: No leakage of the battery pack or the system. The shell rupture. Fire or explosion phenomenon
Product Parameter:
Company Profile:
Test objective: Simulation battery package or system at a certain temperature, a certain pH and a certain concentration of salt spray environment to maintain for a period of time, the battery package or system will appear leakage, shell rupture, fire or explosion phenomenon, with the phenomenon structure as an important basis to judge its safety line. At the same time, the machine can also test the corrosion resistance of its products after electroplating, anode treatment, spraying, anticorrosion oil and other corrosion treatment on the surface of various materials. The machine adopts walk-in structure, and the test box has high explosion-proof performance and rapid fire extinguishing device, which can guarantee the test safety
Test procedure:
2.1. The test object is the battery pack or the system
2.2. Four test cycles according to GB / T 2423.18 Harness Level (5)
2.3. The salt solution is sodium chloride (chemically pure. Analytically pure) and distilled or deionized water configurations at a concentration of (5 ± 0.1)% (mass fraction).(20 ± 2) The PH value measured at ºC is between 6.5 and 7.2
2.4. Put the test object into the salt spray box and spray salt spray at 15ºC ~35ºC for 2h. After the spray, the test subjects were transferred to a damp heat box for 20h~22h, temperature (40 ± 2) ºC and relative humidity (90 ± 3)% into a cycle. This cycle was repeated three times and then stored for 3d in the test standard atmospheric conditions [temperature (23 ± 2) ºC, relative humidity 45%~55%] to form one cycle for four repeated cycles
2.5. Requirements: No leakage of the battery pack or the system. The shell rupture. Fire or explosion phenomenon
Product Parameter:
| product model | HT-CD-1131 |
| satisfying standard | GB 31467.3, etc |
| Internal box size | W2000XD3000XH2000 MM |
| outline dimension | W2300XD5200XH3000 MM (In the case of the actual size) |
| load capacity | 1000 KG (customizable) |
| temperature range | 0ºC~+85ºC |
| temperature fluctuation | ±0.5 |
| temperature departure | ±2 |
| Saline spray volume | 1-2 mL / 80cm²1hr (collected for 16 hours and averaged) |
| Spray pressure | 1.00±0.01kgf/cm2 |
| resolution ratio | Temperature: 0.01ºC, Humidity: 0.01% R.H. |
| Humidity range | 20%-98%R.H. |
| relative humidity fluctuation | ±3%R.H |
| Poetic PH | Neutral 6.0 to 7.0 Acid 3.0 to 3.1 |
| The PH value of the spray solution | Neutral 6.5~7.2 Acid 3.1~3.3 |
| time frame | 1S~9999H can be set arbitrarily |
| control method | The 7-inch TFT real-color LED LCD touch screen |
| Internal box material | Acid and alkali resistant material SUS316 # stainless steel iron fluorplating |
| External box material | Cold-resistant cold rolled steel plate spraying treatment |
| cooling-down method | forced air cooling |
| gross weight of equipment | About 7 tons |
| Total power supply for equipment | AC380V 50HZ 40KW |
| Other safety requirements | Explosion-proof and pressure relief system |
| Spray fire extinguishing system | |
| Video surveillance system | |
| Smoke alarm system | |
| lighting system |
Company Profile:
